Chilled Water Coil Restoration
Chiller based cooling systems are used in large commercial and industrial systems. These systems usually service a number of large AHU. The coils that reside inside of the units have between 4-10 rows of tubes making them 6-12 inches thick. They can also have a very tightly packed fin configuration. This size and configuration makes it very difficult to effectively clean the whole surface area of the coil.
The Biomik Process has been specifically developed to achieve the goal of optimizing the thermal transfer surface of the coil in its entirety. Optimized coils will deliver improved air flow and delivered more BTUs to the service area. This will have a profound effect on the chilled water loop. The coil will become more efficient and squeeze more BTUs out of each gallon of chilled water that passes through the coil. The net effect is that fewer gallons of chilled water are required to meet the cooling load. This reduction of chilled water required is where energy savings materialize.
Biömik® Patented Coil Restoration
- Dirty coils operate well below design performance parameters, this will affect performance and increase energy costs.
- Avoid expensive capital expenditure by restoring performance and increasing equipment life cycle
- Our patented process combines breakthroughs in biological science with the very best in technical processes, equipment and expertise. Case studies available upon request.
How it works:
This process is highly effective on both biological and Industrial fouling. Years of development has maximized cleaning ability while eliminating risk to the coils being optimized.
Think of our Probiotic coil products as tiny active and multiplying cleaning machines. They actively enter and utilize natural biological process to detach and remove the real enemy of coil performance.....BIOFILM
Measuring the gains in air handler performance is a difficult and time consuming task. A comprehensive approach that can trend BTU output for a period of time before and after is the only sound approach to determine the net benefit of the Biomik Process. These Measurement and verification (M&V) services can be added on to your project to help all intersted parties understand the real benefits of your project.